Dust filter P2 5925 - 3M

3M™ bayonet particle pre-filters are used to add particle protection to 3M™ bayonet gas and vapor filters. Replaceable for cost savings: these particle filters are designed to be easily replaced for a cost-effective solution without changing the entire cartridge. Use 3M™ bayonet particle pre-filters with 3M™ gas and vapor filters and the 3M™ 501 filter retainer to help filter certain particles, including dusts, mists, fibers, and metal fumes, in addition to a wide range of gases and vapors. Or use these filters with the 3M™ 603 filter adapter and the 3M™ 501 filter retainer to help reduce particle exposures only. These filters are easy to install. 3M™ bayonet particle pre-filters are compatible with 3M™ 6000 series half facepieces or 6500QL, 7500 series full facepieces, helping to reduce stock references. Help protect your workers: 3M offers a free online tool to assist you in selecting the appropriate masks and filters for the respiratory hazards and contaminants at your workplace and to determine filter replacement frequencies. 3M Select and the service life estimation software (www.3M.com/sls) include over 700 different chemicals and provide documentation on your selections. After determining the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M™ reusable respirator and the corresponding P2 or P3 particle filter. 3M™ bayonet particle pre-filters are CE-approved P2 or P3 antistatic particle filters. They help provide respiratory protection in particle-containing environments when used with 3M™ bayonet half facepieces and full facepieces as well as additional accessories. These filters help ensure respiratory protection against particulate contaminants. Do not use in immediately dangerous to life or health (IDLH) environments or where a P2 or P3 approved filter is required. Replace your 3M™ bayonet particle pre-filters if they become dirty, damaged, or make breathing difficult.